right topbar

Flat Tip Design


Carbide Flat Tips are a versatile design that are suitable for a wide range of applications. Carbide Flat Tip designs feature a single vacuum hole and a flat contact surface controlled to stringent flatness tolerances.

Oricus manufactures an extensive range of Carbide Flat Tips sizes with central and offset vacuum hole configurations in various sizes.


  • Direct contact to the face of the die or device
  • Can be made in Round, Square, Rectangular and Custom outer profiles
  • Harder than Rubber, Engineering Plastics and Alloy Steel Flat Tips
  • Highest wear resistance amongst Rubber, Engineering Plastics and Alloy Steel Flat Tips
  • Highest temperature resistance amongst Rubber, Engineering Plastics and Alloy Steel Flat Tips


  • Cost effective solution compared to other design types
  • Universal design that is suitable for a wide range of dies sizes and thicknesses
  • Offers structural support to the die or device, allowing for minimal flex to during the Pick and Place process
  • Allows for uniform bond force to be applied throughout the tip surface, reducing the probability of voids in the epoxy or DAF
  • Longest tool life compared to Rubber, Engineering Plastics and Alloy Steel Flat Tips

Material Information

Each and every material selected for use in our products go through a stringent Selection, Development and Assessment process. In-house developed compounds are developed with the latest innovations in material technology and feature formulations that are designed specially for use in the Semiconductor industry. For externally procured materials, each material goes through a rigorous Quality Assurance and Performance Assessment programme before being qualified for use in our products.

Material Description Hardness ESD Surface Resistance (Ω) Service Temperatures (Deg C)
Carbide, K15 HV30 1740 Conductive (< E2) >800
Carbide, K30 HV30 1450 - 1570 Conductive (< E2) >800
Carbide, M30 HV30 1315 - 1350 Conductive (< E2) >800
Carbide, MG30 HV30 1350-1400 Conductive (< E2) >800

Product Information

Standard Sizes

Part Number X (mm) Y (mm)
PS-VDFT-DA01-00600060-01 0.60 0.60
PS-VDFT-DA01-01300065-01 1.30 0.65
PS-VDFT-DA01-01500075-01 1.50 0.75
PS-VDFT-DA01-01550105-01 1.55 1.05

Customized Designs

If you are unable to find a size that fits your application from our catalog, get in touch with us and our Application Experts will provide you with a customized turnkey solution according to your die size, process and application.

Part Numbers And Ordering

PS – Pick Up Tool with Square and Rectangular Profiles PR – Pick Up Tool with Round Profiles
  • W – Hybrid Carbide
  • V – Full Carbide
  • Y – Superalloys
  • L – Stainless Steels
  • S – Steels
  • F – Non-Ferrous
  • E – Engineering Plastics
  • P - Performance Engineering Plastics
A to Z Refer to material tables for full listing
  • F – Flat
  • R – Relief
  • G – Groove
  • M – Multi-Hole
  • C – Side Clamp
Multiple codes depending on specific features
  • AP - Alphasem
  • AS – ASM
  • CA – Canon Bestem
  • DA – Datacon
  • EE – ESEC
  • EM – EMTEC
  • HA – Hitachi
  • MR – MRSI
  • PA – Palomar
  • SR - Shibaura
  • SW – Shinkawa
  • UD – Universal Design
0 1
Machine Model
01 to 99 according to different machine models
0 0 6 0
Tip Length or Tip OD Code
For lengths:
4 digit code 1590 = 15.9mm
For OD:
4 digit code 0800 = 8mm
0 0 6 0
Tip Width Code or
Tip ID Code
For widths:
4 digit code 0518 = 5.18mm
For ID:
4 digit code 0600 = 6mm
1 to 99